| |
SLM |
RLM |
| Size of lap |
Max. 630 mm dia. x 232 mm width |
Max. 630 mm dia. x 300 mm width |
| Lap weight |
Max. 48 lbs. (232 width)
(depends upon spinning condition) |
Max. 48 lbs. (300 width)
(depends upon spinning condition) |
| No. of creel slivers |
20 pieces |
|
| Draft roller |
4 over 4 curve drafting system |
4 over 4 curve drafting system |
| Drafting range |
1.4 - 2.2 |
4.2 - 6.0 |
| Roller gauge |
Min. 135 mm - Max. 200 mm |
Min. 120 mm - 185 mm |
| Top roller diameter |
34 x 34 x 34 x 34 mm |
30 x 30 x 37 x 37 mm |
| Bottom roller diameter |
40 x 38 x 38 x 38 mm |
40 x 38 x 38 x 38 mm |
| Top roller load |
80 x 80 x 80 x 80 kg/ID |
60 x 60 x 80 x 80 kg/ID |
| Winding speed |
Max. 110 m/min.
(depends upon spinning condition) |
Max. 100 m/min.
(depends upon spinning condition) |
| Winding part |
Air pressure system |
| Motor |
Main motor 7.5 kW (Pole change motor)
Cutting motor 0.4 kW x 4P
Conveyor motor 0.1 kW x 4P (1/45) with magnetic brake
Motor for pneumatic system 0.6 kW x 2P |
Main motor 7.5 kW (Pole change motor)
Cutting motor 0.4 kW x 4P
Conveyor motor 0.1 kW x 4P(1/45) with magnetic brake
Motor for pneumatic system 0.6 kW x 2P |
