Automatic Drawing-in Machine The First Air Jet Drawing-in Machine in the World for Efficient Mill Operation Using a non-contact system to draw in the warp yarns, the SDM100 eliminates damage to the healds or reed. Irregular warp streaks do not show up in the woven fabric and warp breaks are significantly reduced. The SDM100's advanced automation makes it possible for a single operator to handle the entire drawing-in process, allowing him/her to prepare for the next drawing-in step in parallel. The warp yarn beam is fixed during the drawing-in process, which results in space-saving. Drawing-in can be performed while the healds are on the carrier rods or in the heald frames, and while droppers are mounted on the dropper bars. Drawing-in width : 1,500mm, 2,300 mm Applicable warp yarn : Glass fiber, filament, cotton, wool Drawing speed : 80 ends/min Heald : Riderless type, flat type, 4, 16 or 20 rows Dropper : Closed type (4 or 6 rows) Machine size : (L)3.0 x (W)2.0 x (H)2.2 m, (L)3.8 x (W)2.0 x (H)2.2 m Power : AC 100V, 50/60 Hz, 0.6KVA Compressed air 0.5 MPa, 0.6 Nm3/min.