Exhibition Info
- 2008
- 2007
- 2006

Exhibition Info

Sophisticated electronics technology is an essential factor to improve the vehicle' s environmental performance and ride comfort. We are developing and producing electronics devices such as powered equipments as typified by hybrid systems, which contribute to further computerization of the vehicles in the future.

Plug-in Hybrid Charger (Under Development)



	The plug-in hybrid chrger makes it possible to charge the hyblid vehicle's battery from a household AC power source and make use of lower late-night electricity rates. As a result, the mileage in EV-mode can be increased dramatcally and contributions to environmental preservation can also be made through improved fuel efficiency and reduced CO₂ emissions.

DC-DC Converter for the Prius


The converter takes the high voltage from the Prius' main battery and converts it to 14V of direct current to charge the auxiliary battery and supply power to electronic equipment such as the lights, wipers, and horn. A small size and low cost have both been achieved.

	Operational voltage range DC168v - 300V Voltage output DC14V Electrical power output 1,400W Dimensions W 270 mm L 150 mm H 44 mm Weight 3,830 g Cooling system Water-cooled Installation position Engine room

DC-DC Converter for the Electric Power Steering


This is the power supply for the vehicle's electric power steering(EPS).

< Conventional Vehicles >
	Operational voltage range DC8v - 16V Voltage output DC45V Electrical power output Maximum 1,104W Dimensions W 120 mm L 124 mm H 45 mm Weight 1,100 g Cooling system Air-cooled Installation position Engine room, saloon(both possible) Equipped vehicle LEXUS LS460
< Hybrid Vehicles >
	Operational voltage range DC230v - 450V Voltage output DC45V Electrical power output Maximum 2,530W Dimensions W 300 mm L 140 mm H 50 mm Weight 2,190 g Cooling system Air-cooled Installation position room, saloon Equipped vehicle LEXUS LS600h

100W/400W DC-AC Inverter


The inverter takes the 12V direct current from the vehicle's auxiliary battery and converts it to household and commercial alternating current so that a variety of household electronic products can be used inside the vehicle. Its compact and smart design allows it to be installed in a variety of vehicles.

< 100W DC - AC Inverter >

	Electrical power output 100W Operational voltage range DC11V - 15V Voltage output AC100V - 115V Output waveform Modified sine wave Dimensions W 123 mm L 106 mm H 40 mm Weight 420 g Cooling system Air-cooled Installation position saloon Output frequency Domestic/55Hz, North America/60Hz


< 400W DC - AC Inverter >

	Electrical power output 400W Operational voltage range DC11V - 15V Voltage output AC115V Output waveform Modified sine wave Dimensions W 168 mm L 160 mm H 70 mm Weight 1,400 g Cooling system Fan-cooled Installation position saloon Output 60Hz

Terresrial Digital TV Module for ISDB-T One-Segment Broadcasts



	This new module provides superior reception and performance over the old one-segment broadcast tuners. In addition to the audio and video decoding functions, display functions for subtitles and electronic program guides have also been added to further expand the possibilities and enjoyment for the viewers.

Return to Top