Japanese

Types of Compressor and Structure

Structure

This compressor is constructed from cylinders and 5 vanes built into the rotors, as well as 2 discharge valves and front and back side plates.
The 5 vanes rotate in tandem with the rotors while contacting the wall inside the cylinder.

Structure

Operation

Cylinder volume increases with rotor rotation, causing refrigerant to flow into the cylinder shaft from the suction port.
The refrigerant is sealed within the cylinder by the vanes, and is compressed by the rotation of the rotor. It is then discharged from the discharge port once it reaches outlet pressure.
The compressor is equipped with two suction and discharge ports. Refrigerant is discharged 10 times for each rotation.

Operation Product information can be found here.

Return to Top